Kobs Pipe is one of the best supplier and of Incoloy Elbow. The function of Incoloy Elbow is to change direction of flow in a piping system. Elbows are split into three groups, which define the distance over which they change direction, which is expressed as a function of the distance from the centre line of one end to the opposite face.
Kobs India offers a wide range of Incoloy Elbow, which is manufactured at par with the international quality standards making use of high-grade steel. Incoloy Butt Weld Pipe Fittings whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Incoloy Tee Butt Weld Pipe Fittings is often used in Chemical Process Industry: such as in Sulphuric Acid Production, Nitric Acid Processes, Phosphoric Acid Processes, Ethylene oxide, Polypropylene Production, PVC, Equipment Handling Organic and Fatty Acids, Chemical Storage and Tankers, Heat Exchangers, etc. Duplex Steel S31803 Reducer Pipe Fittings resists chloride environments and sulphide stress corrosion.
Grade: Incoloy 800(2.4958), Incoloy 800H, Incoloy 800HT
|Fe||39.5 min||39.5 min||39.5 min|
|Cu||0.75 max||0.75 max||0.75 max|
|Mn||1.5 max||1.5 max||1.5 max|
|S||0.015 max||0.015 max||0.015 max|
|Si||1.0 max||1.0 max||1.0 max|
|Melting Point||1385 °C (2525 °F)|
|Tensile Strength||Psi – 75,000 , MPa – 520|
|Yield Strength (0.2%Offset)||Psi – 30,000 , MPa –205|
Stainless Steel :
Grade: 304 (1.4301), 304L(1.4307), 304H (1.4948), 309 (1.4828), 309S, 310, 310S (1.4845), 316( 1.4401), 316H, 316L( 1.4404 /1.4432) , 317, 317L (1.4438), 321 (1.4541), 321 H(1.4878), 347 (1.4550), 347H (1.4961), 904L (1.4539)
Grade: 2205 (1.4507)
Super Duplex Steel:
Grade: 2507 (UNS S32750)
Grade: Inconel 600 (2.4640), Inconel 601 (2.4851), Inconel 625 (2.4856), Inconel 718(2.4668)
Grade: Nickel 200, Nickel 201
Grade: Gr.1 (3.7025) , Gr.2 (3.7035) , Gr.3(3.7055) , Gr.5(3.7164/65), Gr. 7(3.7235) , Gr. 11 (3.7225)
Grade: Monel 400 ( 2.4360) ( 2.4360), Monel K500 (2.4375), Monel R-405
Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
The principal methods of hot working are extrusion, drawing, forging and rolling. Rolling is the most extensive employed forming process, though some limitations may apply to the process. Rolling mainly consists of three major sub-categories: flat rolling, shape rolling (with specifically designed roll grooves) and pipe rolling (including piercing). Forging may be sub-categorized as hamming, pressing, etc. .
Forging may be performed under hammers, in mechanical presses and upsetters or by a method known as roll forging. Pressing generally includes the manufacture of forged articles in hydraulic presses. Extrusion usually is performed in hydraulic presses which force the hot steel through a die. Rolling is performed in rolling mills of a variety of types. .
The two principal reasons for perform metal forming at elevated temperatures (hot working) are to reduce the forming loads through the reduction of the resistance of the steel to deformation, and to develop preferred metallurgical structures for strength and ductility of the finish products.
The most appropriate manufacturing method of a product will be decided with consideration of its material, sizes, shape, use, standards and other properties.